Metric Spherical Bearings

Metric Spherical Bearings

Product Description The structure of Swivel Ball Joint Rod End bearing is simpler than that of the rolling bearing, which mainly consists of an inner ring with an outer sphere and an outer ring with an inner sphere. It is generally used for the oscillating motion with low velocity (i.e. angular...

Product Details

Product Description

Metric Spherical Bearings consist of an inner ring with a convex spherical outer surface and an outer ring with a corresponding concave spherical inner surface. This design is particularly suitable for bearing configurations in the following conditions: must be able to adjust the alignment deviation between the shaft and the bearing seat, or must be able to reciprocate or periodically swing or rotate at a relatively slow sliding speed.


Product Features

Made of high quality carbon steel

Self-lubricating, wear resistance, self-aligning and low friction.

Can bear a radial heavy load and a mechanical mechanism with not big axial load in any direction.


Steel ball joint rod ends(XCOM-03)

1). Material:
Race- Low Carbon Steel,
Plated Zinc/Clear or Silver
Liner- Nylon type 6/6 or 6/12
40% long glass. with 5%
molybdenum disulifide
Ball- Low Carbon Steel,
Case Hardened,
Hard Chrome Plated
2). Do not scale drawing.
3). Unless otherwise specified,all dims are in inches.
4). All dimensions apply after plating.
Plating must withstand 96hr of salt spray test per ASTM B117 without any visible red rust.

图片1.jpg

Our service
Pre-sales: recommend suitable types, provide non-bid price processing, and customize and provide samples according to customer's requirements.
Carry out production in strict accordance with international standards and enterprise standards.
Timely communicate with customers and keep continuous improvement.

Inquiry