We are the Leading Supplier of Metric Ball Joint Rod Ends. The Rod End is a spherical slide bearing incorporating a spherical inner ring with precision and hardness equivalent to that of steel ball bearings.
The basic type is composed of inner and outer rings with a spherical sliding surface. Depending on its structure and type, it can bear radial load, axial load, or combined load of radial and axial simultaneously. Morever, it has relatively large load capacity and impact resistance, and features of corrosion resistance, wear resistance, self-centering, good lubrication or self-lubrication free of lubrication filth pollution. Even if the installation is maladjusted, it can work normally. Therefore, the joint bearings are widely used in the lower speed swing motion, inclined motion and rotary motion.
Rod end joint bearings are mainly used for supporting parts where the concentricity is not high, the working surface pressure is large, and the slow swinging and turning motion are performed.
1. Metric Ball Joint Rod Ends bearings achieve high strength and high precision.
2. Stainless steel bearings can be used under special conditions such as acid and water resistance.
3. Because of its high mechanical strength and large load capacity, it is widely used in food processing, medical machinery, and pharmaceutical machinery.
4. It has the features of corrosion resistance and wear resistance, so it can be used for a long time.
|Place of Origin:||Jiangsu, China(Mainland)|
|Ball Material:||Stainless Steel|
Housing- 300 Series Stainless Steel.
Race:Brass lined with Teflon*
Ball- 440 C Stainless Steel.Hardened. Hard Chrome Plated.
2).Do not scale drawing.
3).Unless otherwise specified. all dims are in mm.
4).Breakaway torque for ball must be≤ 500 oz-in