Features and advantages of PTFE Lined Metric Rod End Bearings ends

- Jan 25, 2019-

The PTFE Lined Metric Rod End Bearings end bearing features a PTFE lining that provides a low coefficient of friction on the sliding surface, allowing for a wide temperature range of 0.02 mm; it can be used where many liquid lubricants fail; it also has a lubricating effect.

 

PTFE Lined Metric Rod End Bearings ends can withstand radial loads, axial loads or combined loads in both radial and axial directions. Since the outer surface of the inner ring is provided with a composite material, the bearing can be self-lubricated during operation. Generally used for low-speed oscillating motion, and low-speed rotation, it can also be tilted within a certain angle range. When the support shaft and the shaft housing hole are different, the normal operation can still be performed.

 

At the same time, because of the special processing methods of PTFE Lined Metric Rod End Bearings end bearings, such as surface phosphating, galvanizing, chrome plating or outer sliding surface lining, inserting, spraying and so on. Therefore, it has large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubricating and non-lubricating dirt pollution.

PTFE Lined Metric Rod End Bearings end bearings are widely used in engineering hydraulic cylinders, forging machine tools, construction machinery, automation equipment, automobile shock absorbers, water conservancy machinery and other industries.

 

http://www.wxjwbearing.com