First of all, let's briefly introduce the product features of the imperial clevis. In general, the Universal Wiring Inch U-Prong products have the following typical features that make sense for practical use:
Imperial clevis type products have universal mounting feet, so they can be installed on the U-rail NC 35, or NC-32 rail. And the enclosed screw guide hole to ensure the ideal screwdriver operation.
In addition, the distribution of potentials for imperial clevis products can be achieved by means of a fixed bridge in the center of the access terminal or a plug-in bridge inserted in the connection cavity. At the same time it should also be equipped with the appropriate accessories, such as files, dividers, etc., and the appearance of the same ground terminals.
From the structure point of view, the imperial clevis products in the screw part is made of high strength copper alloy, while the conductor is made of electrolytic copper. Due to the unique crimping structure, the product has good self-locking and anti-loosening performance. In general, the product is designed and applied to facilitate wire connections.
Normally, the U-shaped fork products are provided with holes on both ends to facilitate the wire insertion, and there are screws for fastening or loosening, such as two wires, sometimes need to connect, and sometimes need to be broken. In this case, the product can be connected with them and can be disconnected at any time without having to weld them together or wind them together, which is convenient and quick.
In addition, in order to ensure the use of British U-shaped fork effect, usually on the surface of its treatment, which on the one hand can reduce the friction coefficient, while also providing environmental isolation.