Introduction to the application of the female rod end bearing

- Nov 09, 2018-

The rod ends of the female end bearings can be formed into rods, tubes, tubes or cables in a practical application to allow misalignment between the two moving points. The spherical part can usually be made of low carbon steel and hardened on the surface, which is resistant to abrasion and corrosion resistance of the coating. As for the configuration and structural style of the female end bearing, it can be changed according to manufacturing considerations.


The outer end of the rod end bearing can be made of mild steel and coated and dichromate treated to provide corrosion resistance. Mounting studs: The mounting studs are made of mild steel by electroplating and dichromate treatment with optional features specified by the "S" after the nominal size. The standard stud thread is the right hand.


It should be noted that at the time of installation, the mounting bolts are specified at the ball end of the female end bearing to minimize assembly time, and the number of parts purchased can be reduced to overcome the working space limitation.