Lubrication requirements and regular maintenance of stainless steel rod ends

- Jul 01, 2019-

Self-lubricating joints for stainless steel rod ends are used in water conservancy and professional machinery industries. Because the spherical sliding contact area of the joint bearing is large, the inclination angle is large, and because most of the joint bearings adopt special processing methods, such as surface phosphating, galvanizing, chrome plating or outer sliding surface lining, inserting, spraying and the like. Therefore, it has large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubricating and non-lubricating dirt pollution, even if the installation is misplaced, it can work normally. Therefore, joint bearings are widely used for low-speed oscillating motions, tilting motions, and rotational motions.

 

Regular maintenance of stainless steel rod ends

 

In order to ensure the normal operation of the host, according to the request of the host and the bearing design theory and application experience, set a maintenance cycle and regular maintenance.

 

Stainless steel rod end fault repair: stop inspection and maintenance when the bearing is in trouble.

 

Stainless steel rod end warning maintenance: the application of bearing fault diagnosis technology, the real-time monitoring of the bearing state is stopped, and the warning is issued before the bearing is out of order, and the maintenance is stopped.

 

http://www.wxjwbearing.com/