Radial spherical plain bearing model classification

- May 17, 2019-

(1) GE...E type has a single outer ring and no lubricating oil groove. Can withstand radial loads and small axial loads in either direction.

 

(2) GE...ES type single-slit outer ring with lubricating oil groove. The use of variable speed bearings can be analyzed to withstand radial loads and small axial loads in either direction.

 

(3) GE...ES-2RS single-slit outer ring with lubricating oil groove and sealing ring on both sides. Can withstand radial loads and small axial loads in either direction.

 

(4) GEEW...ES-2RS single-slit outer ring with lubricating oil groove and sealing ring on both sides. Can withstand radial loads and small axial loads in either direction.

 

(5) GE...ESN single-slit outer ring with lubrication groove and outer ring with stop groove. TIMKEN bearing quality judgment error 5 can withstand radial loads and small axial loads in either direction. However, when the axial load is received by the retaining ring, its ability to withstand axial loads is reduced.

 

(6) GE...XSN double-slit outer ring (split outer ring) with lubricating oil groove and outer ring with retaining groove. Can withstand radial loads and small axial loads in either direction. However, when the axial load is received by the retaining ring, its ability to withstand axial loads is reduced.

 

(7) GE...HS inner ring has lubricating oil groove, double half outer ring, and the clearance can be adjusted after wear. Can withstand radial loads and small axial loads in either direction.

 

(8) GE...DE1 inner ring is hardened bearing steel and outer ring is bearing steel. Extrusion during assembly of the inner ring, with lubrication grooves and oil holes. Bearings with an inner diameter of less than 15 mm, no lubrication grooves and oil holes. Can withstand radial loads and small axial loads in either direction.

 

(9) GE...DEM1 inner ring is hardened bearing steel and outer ring is bearing steel. When the inner ring is assembled, it is extruded. After the bearing is installed in the bearing seat, the TIMKEN bearing ring is super-finely ground. The end groove is pressed out on the outer ring to fix the bearing axially. Can withstand radial loads and small axial loads in either direction.

 

(10) GE...DS type outer ring has assembly groove and lubrication groove. Limited to large size bearings. Can withstand radial loads and small axial loads in either direction (the side of the mounting groove cannot withstand axial loads).

 

https://www.wxjwbearing.com/