Rod ends spherical bearings contact surface area and load requirements

- Sep 27, 2017-

The rod ends spherical bearings is mainly spherical plain bearing, in the use of this type is a spherical sliding spherical surface with the inner and outer ring, the rod ends spherical bearings is mainly by a spherical outer ring and an inner spherical Of the outer ring, in the use of the ability to withstand its larger load.

Rod ends spherical bearings will be effective according to their different types and structures, to a certain extent, can withstand its radial load, axial and axial load or radial simultaneous joint load, in use due to the outer ring The ball will be embedded in the composite material, so this bearing in the course of work can produce self-lubricating.

Rod ends spherical bearings generally use the speed of the relatively low swing movement, but also in a certain range of angle for the tilt movement, when the support shaft and the shaft hole hole greater degree of mind, still able to work properly. Self-lubricating joint support used in water conservancy, professional machinery and other industries.

Because the rod ends spherical bearings spherical contact area is large, the tilt angle is large, but also because most of the joint bearing to take a special process, such as surface phosphating, galvanizing, chrome or outer sliding surface lining, Wait.

Rod ends spherical bearings also have a large load capacity and impact resistance, and has anti-corrosion, wear resistance, self-aligning, good lubrication or self-lubricating non-lubricating dirt pollution characteristics, even if the installation can also work properly The As a result, articulated bearings are widely used for low-speed swing, tilt and rotary motion.

rod ends spherical bearings and rod end bearings are available in a variety of designs and have different sliding contact surfaces. Each design and combination has a unique performance that makes it particularly suitable for certain applications. Rod end bearing is mainly used for concentricity is not demanding, the work surface pressure and slow swing and swing movement of the support parts.

Wuxi Jinwei Precision Machinery Co., Ltd
Address: Yang shan Town, Huishan District, WuxiCity, Jiangsu Province
Contact: Weiming Cai
Tel: +86-510-83951313
Fax: +86-510-83958913
Fax: +86-13906170913