The stainless steel rod end has its own technical characteristics and maintenance requirements because of its unique structure and working mechanism. In practical applications, the operating temperature must first be taken into account. The operating temperature is usually determined by the mating material between the sliding surfaces of the bearing.
Secondly, during installation, under normal circumstances, the inclination angle between the stainless steel rod end and the joint bearing is much larger than that of an ordinary adjustable ball bearing, and it is very suitable for use in a bearing position where the concentricity is not high enough. The inclination differs depending on the size of the bearing structure, the type, the sealing device and the form of the support.
Then we must also consider the situation of cooperation. No matter what the actual application, the stainless steel rod end and the joint bearing selected for use must not cause uneven deformation of the ferrule. The choice of the mating properties and grades usually depends on the bearing type, bearing type, and load conditions. In addition, corresponding lubrication protection must be done during the work to ensure that it meets the requirements for use.