In rod end spherical plain bearings, the structure of the rod-end spherical joint can be optimized accordingly. For example, the spherical surface uses high-precision steel balls for bearings. After the steel balls are wrapped by die-casting and the holders are shaped, they are linked to the neck by special welding. When the rod-end spherical bearings are used, A smooth movement of a small gap is achieved.
At the same time, in the design of the rod end spherical plain bearing, the balance design makes it not only have high strength but also has a very compact shape structure, achieving a compact design. As a result, the product can be used in more rigorous workplaces.
Not only that, but also the wear resistance of this rod end spherical plain bearing is excellent. In addition, the outer surface of the outer ring surface of the rod end spherical bearing is machined with a rolling thread and can be simply mounted on a support base. Moreover, only by tightening the screws, it is possible to achieve a solid fixation without a gap, and the contact area of the spherical surface is sufficient so that it can withstand a large axial load.