Track rod end protection and maintenance and standard settings

- Jun 07, 2019-

The track rod end mainly refers to the end of the overhanging beam during use. Such as the cantilever beam end. The support refers to the support of the beam, with a fixed hinge support and a movable hinge support. A node is a beam or rod that is hinged and does not touch the ground.

Track rod end protection and repair

1. Regular maintenance: In order to ensure the normal operation of the host, according to the request of the host and the design theory and application experience of the bearing, set a maintenance cycle and regular maintenance.

2. Fault repair: When the bearing is in trouble, stop the inspection and repair.

3. Early warning maintenance: Apply advanced bearing fault diagnosis technology, stop real-time monitoring of the bearing operation status, and make advance notice before the bearing attack, stop maintenance.

When the track rod end is in use, the vibration level can be measured by a special rod end joint bearing vibration measuring device (frequency analyzer, etc.), and the specific situation of the abnormality cannot be inferred by the frequency division. The measured value differs depending on the conditions of use of the rod end joint bearing or the position at which the sensor is mounted. Therefore, it is necessary to analyze and compare the measured values of each machine in advance to determine the judgment