Whether the metric female rod ends is optional and the rod end bending moment is important

- Nov 19, 2018 -

The metric female rod ends, which is a specific type of rod end, and like the ordinary rod end, it is necessary to pay attention to its purchase work, because if the wrong choice occurs, it will affect the use and use of the product, and even the product can not be used. Bring economic losses and waste products. In terms of purchase considerations, the basic and important considerations are to take into account the five factors of product origin, detailed parameters, real-time quotes and price quotes, product quality, and manufacturer, and on some targeted factors. , there will be differences.

 

From the current point of view, there are three ways to purchase the metric male rod end. One is to find the manufacturer directly to purchase, the other is to purchase the product through the agent, and the third is to purchase the product on the industry website. And which way to choose is determined by its own conditions and actual conditions.

 

This is because the selection of professional and regular metric female rod ends manufacturers can guarantee the product quality and product performance and use effect, as well as the after-sales service quality of the products. If the product has problems during use, it can be resolved in time to avoid affecting the normal use of the product.

 

The metric in the metric rod end refers to the type of unit of the shank end, because it is metric and imperial, the metric is in millimeters, and the inch is in inches. Therefore, it is necessary to clarify these two units, and then determine the size unit and specific value of the metric rod end to avoid errors.

 

The rod end bending moment, in general terms, refers to the internal force value at the intersection of the rigid joints at the intersection of the rods. The solid end bending moment refers to the force received when the external force of the embedded end is balanced with the internal force of the rod end. . Therefore, the rod end bending moment and the solid end bending moment are different, and are two different concepts. Rod end bending moment is an important aspect and parameter for the metric rod end. It should not be underestimated and sloppy.

 

http://www.wxjwbearing.com/